|
|
This coverall has a great look and fit. It features five pockets and concealed YKK® non-sparking front zipper and 100% brass press stud covered on the inside, so no brass comes in contact with your skin. Major seams are double- or triple-stitched, with stress points bar-tacked for added strength. 2"/50mm FR reflective tape applied to shoulders, legs and arms for added visibility and safety. |
|
|
Material |
Red Wing FlashGuard® TM, (Quality 11), FR 48% Tencel/39% Modacrylic/12% Aramid/1% Carbon, 6.5 oz/yd²/220 g/m² |
|
|
Sizes |
32-70, Short/Reg/Tall/XTall |
|
|
Compliance |
EN ISO 11612, EN 1149-5, NFPA 2112 UL recognized component -fabric, IEC 61482-2 (Class 1) |
|
|
Technologies |
Flame Resistant Garment, Anti-Static Garment, Electric Arc Flash Protection, CAT2 |
|
|
Colors |
Tan(51), Petro Blue(52)*, Navy Blue(53), Royal Blue(54), Red(55), Graphite Gray(56), Orange(57), Yellow(59)*, Light Gray(76) |
|
Features
-
2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
-
Concealed press button on cuffs
-
Two chest pockets with flaps, right pocket with a concealed zip closure, left pocket with pen sleeve pocket
-
Shoulder pleats for freedom of movement and comfort
-
Two side pockets with hidden exterior-to-interior access
-
Concealed two-way, black high-density polyester coil zip with press stud closure
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.
redwingsafety.com | © Red Wing Shoe Company, Inc.