Red Wing Safety


61329 FR Hi-Vis Coverall

  • frFlame Resistant
  • asAnti-Static
  • hvHigh-Visibility
  • catCategory 2
  • wldWelding Protection
This deluxe, high-visibility coverall fits great and features ten pockets and non-sparking YKK® zips throughout. The sleeves are designed with pre-bent elbows for a more contoured fit and ease of movement. 100% brass press studs are covered on the inside so nothing but soft, protective material comes in contact with your skin. Major seams are triple-stitched and stress points are bar-tacked for strength. Reflective striping is strategically placed for increased visibility and safety.
Material Daletec®, (Quality 29, 642881), FR 74% Cotton, 24% Poly, 2% Antistat, 8.5 oz/yd²/290 g/m²
Sizes 32-70, Short/Reg/Tall/XTall
Compliance EN ISO 11612, EN 1149-5, IEC 61482-2 (Class 1), EN ISO 20471: Class 3, Australia/New Zealand AS/NZS4602.1.2011 Class D/N, EN ISO 11611: Class 1 A1+A2
Technologies Flame Resistant Garment, Anti-Static Garment, High Visibility Garment, Electric Arc Flash Protection, CAT2, Welding Protection


    • Action back pleats for freedom of movement and comfort
    • 2" (50mm) wide reflective FR striping around legs
    • Ruler and tool pocket on right leg
    • Concealed two-way, black high-density polyester coil zip with press stud closure
    • One inside left chest pocket
    • Internal knee pad pockets
    • 2" (50mm) wide reflective FR striping around arms and body
    • Cargo pocket with flap on left leg
    • Inside chest pocket for radio with hook-and-loop closure
    • Sleeves with pre-bent elbows for ease of movement
    • Concealed YKK® brass press studs throughout
    • Two back pockets with flaps
    • Sleeve pocket with pen pocket divider, full flap with hook-and-loop closure
    • Two side pockets with hidden exterior-to-interior access
    • Two chest pockets with zip closure and storm flaps
    • Two radio loops
    • Adjustable cuffs and ankle openings
    • Elasticized waistband
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.


This flame retardant material is tested for resistance against flame flash and electrical arcs under realistic conditions.  This strong yet comfortable product has the properties of cotton, including absorption and transport of moisture.  Workwear made with Daletec material can also be specifies with optional antistatic properties.  Daletec fabrics have been third party certified to meet the requirements of EN 531.