Red Wing Safety

RED WING FOR BUSINESS

61125 Temperate FR Coverall

  • frFlame Resistant
  • arcElectric Arc Flash
  • catCategory 2
 
This coverall has a classic look and great fit. It features eight pockets and YKK® non-sparking zips throughout. 100% brass press studs are covered on the inside, so no brass comes in contact with your skin. Major seams are double- and triple-stitched and stress points are bar-tacked for strength. 2" reflective FR striping added for better visibility and safety.
Material Westex UltraSoft®, (Quality 25), FR 88% Cotton/12% Nylon, 7 oz/yd²/235 g/m²
Sizes 32-70 Short/Regular/Tall/Extra Tall
Compliance EN ISO 11612, NFPA 2112 UL recognized component -fabric, IEC 61482-2 (Class 1)
Technologies Flame Resistant Garment, Electric Arc Flash, CAT2
Colors Tan(51)*, Petro Blue(52)*, Navy Blue(53), Royal Blue(54)*, Red(55), Orange(57), Light Gray(76)

Features

    • Two chest pockets with concealed zip closure
    • Two side pockets with hidden exterior-to-interior access and press stud closure
    • Two back pockets, right side with flap
    • Tool pocket on right leg
    • Elasticized waistband
    • 2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
    • Two radio loops
    • Concealed two-way, black high-density polyester coil zip with press stud closure
    • Concealed press studs on cuffs and ankle openings
    • Left sleeve pocket with pen pocket divider, small flap with hook-and-loop closure
    • Shoulder pleats for freedom of movement and comfort
 
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.
 
 
xClose

Nomex® IIIA

Manufactured by DuPont®, Nomex IIIA materials are inherently flame-resistant and offer standard antistatic properties.  The fibers won’t melt and drip, or support combustion in the air.  Fabrics made from Nomex IIIA have been third party certifies to meet the requirements to NFPA 2112 and EN 531.